国电客服中心(一期)景观工程喷灌给水工程设计毕业论文

 2021-04-12 10:04

摘 要

在本次设计中,以资源的合理利用为基本原则的指导,首先对水源进行分析,设计水源主要采用人工湖的水源供水,人工湖补水方式有从雨水回收池供给和从市政管网供给两种,既能满足灌溉用水,又能达到人工湖的水质改善。设计水源出口压力为0.65MPa,设计流量为80m3/h。再进行喷灌系统的选择和喷头的选型,系统采用整体泵站保证喷灌的正常使用。根据该产业园的条件,喷洒区域以小型地块为主,有一定的灵活性,可选择PROS-04散射喷头和MP类型喷头,单个喷头设计流量分别为0.3m3/h和0.6m3/h。采用划分另外采用划分轮灌区分区灌水不仅解决了解决水源供水不足的问题;而且划分轮灌区后,降低了喷灌系统的干管管径和管网成本。整个灌溉灌区共采用1台ACC-99D-PP 控制器;整个灌溉区域分成24个轮灌分区,通过电磁阀连接各干管自动控制开启,分区进行轮灌。喷灌给水系统是绿地建造和管理中有效的节水用水方式之一,根据客观条件适宜的推广绿地喷灌,对节能减排将起到积极的作用,还对推广喷灌这种科学用水的方式有着重要的意义。

关键词:产业园;美化环境;喷灌;轮灌;分区

Customer service center in State power development(1st stage)

Irrigation water supply engineering design of landscape

Abstract

In this design, we ensure the rational use of resources as the guidance of the basic principles. Firstly, we analyze the source of water, The source of water is supplied mainly with artificial lake. There are two types of supplying water to artificial lake, supplying with rainwater recycling and supplying with municipal pipe, which can both serve the needs of irrigation water and improve the quality of artificial lake. The export pressure of the water is 0.65MPa, while the designed flow is 80m3/h. Secondly, we begin to choose the sprinkling system and the type of sprinkler. The whole pumping station was used in this system to ensure the normal working of sprinkler irrigation. According to the conditions of the Industrial Park, we choose the small plots to be the spray area, which is flexible. And then we use PROS-04 scatter nozzle and MP nozzle, the designed flow of them are 0.6m3/h and 0.3m3/h. In addition, through dividing the irrigation rotation to implement partial root zone irrigation, which can not only solve the problem of insufficient water supply, but also reduce the diameter of main pipe and the cost of pipe network in sprinkling irrigation system. We set up one ACC-99D-PP controller in the whole irrigation, and divides the entire irrigation area into 24 rounds, and it can automatically control through using the solenoid valve to connect each mainly pipe, then achieve the rotational irrigation in partitions. Irrigation water supply system is one of the effective ways of water saving in construction and management of green space. Depending on the objective conditions, a suitable promotion of sprinkler irrigation system can produce positive effect to energy conservation and emission reduction, and can also have great significance for promoting sprinkler irrigation as a scientific way of using water.

Keywords: Industrial park; beautify the environment; sprinkler irrigation; irrigation rotation; subarea.

目 录

前 言 1

1 水源分析 2

2 植物灌溉用水 3

2.1 确定植物需水量的方法 3

2.2 参考作物腾发量 3

2.3 植物实际需水量 4

2.3.1 园林系数(KL)概念 4

2.3.2 计算植物需水量 6

3 喷灌系统选型 7

3.1 机组式喷灌系统 7

3.2 管道式喷灌系统 7

3.2.1 全固定管道式喷灌系统 7

3.2.2 全移动管道式喷灌系统 7

3.2.3 半固定管道式喷灌系统 8

3.3 本产业园喷灌系统选择 8

4 喷头选型及配合 9

4.1 喷头 9

4.1.1 喷头的构造 9

4.1.2 喷头的性能 10

4.1.3 喷头的种类 11

4.2 喷头的选型 13

4.3 喷头的布置 13

4.3.1 喷头布置原则 13

4.3.2 喷头的水量分布 14

4.3.3 喷头布置方式 15

4.3.4 喷头组合间距的确定 18

4.3.5 喷灌设计参数 19

5 设计灌溉制度 24

5.1 设计灌水定额 24

5.3 设计灌水历时 25

6 轮灌组的划分 26

6.1 轮灌组划分的原则 26

6.2 轮灌组的确定 27

6.2.1 轮灌组数目的确定 27

7 管道布置 29

7.1 管道系统的分级 29

7.2 管道系统布置的一般原则 29

7.3 管网布置的影响因素 29

7.4 管网布置形式 30

8 管网水力计算 32

8.1 管材和管件 33

8.1.1 聚氯乙烯(PVC)管 33

8.1.2 聚乙烯(PE)管 34

8.1.3 聚丙烯(PP)管 34

8.2 管道的水头损失计算 34

8.3 管径的确定 36

8.3.1确定支管管径 36

8.3.2 干管管径的确定 37

8.4 管网水压验算 39

9 阀门装置 40

9.1 快速取水阀 41

9.1.1 快速取水阀管径的确定 42

9.2 控制阀 42

9.3 进、排气阀 43

9.4 泄水阀 43

9.5 降压阀及水锤消除器 43

10 园林草坪喷灌系统施工安装 44

11 压力管道的水锤计算 46

11.1 水锤计算参数 46

11.2 关闭阀门水锤压力计算 47

11.3 防止水锤危害的措施 48

结 论 49

致 谢 50

参考文献 51

附 录 52

前 言

随着工矿企业水平的提高,产业园区绿地也更多地出现在我们的工作及生活中。产业园区绿地可以有效的净化空气、吸滞粉尘、调节和改善小气候和美化环境,提升企业形象。绿地具有乔灌草结合、功能健全、种群稳定的生态特点。因此,合理的绿地喷灌给水设计是成功的厂矿企业景观的重要因素。节约淡水资源越来越得到社会的提倡,我国正处于国民经济快速发展的阶段,居民生活用水及生产用水总量不断上涨,给市政供水带来很大压力。美化环境,兴建绿地,使生活、生活用水和绿化用水之间的矛盾更加突出。喷灌给水系统是绿地建造和管理中有效的节水用水方式之一,根据客观条件适宜的推广绿地喷灌,对节能减排将起到积极的作用。

在我国农业用水占全社会用水需求的64.1%,比重较大,我国又是水资源短缺的国家,时空分布不均,人均水资源不足。我国大部分耕地集中在北方地区,但干旱少雨导致我国北方水资源缺乏,因此大力发展节水灌溉行业在我国具有重大的历史意义和现实意义。目前我国先进灌溉技术占比较低,并且全国一半以上的耕地没有灌溉设施,60%的有效灌溉面积还在沿用传统落后的灌溉方法,导致大量水资源白白流失。高效灌溉技术在我国的应用比例还很低,有着巨大的发展空间和市场潜力。 相比国外而言,美国的有效灌溉面积为3.83 亿亩,不足我国的一半,但喷灌和滴灌面积却占87%左右。以色列80%以上的灌溉面积采用了先进的滴灌技术,瑞典、英国、奥地利、德国、法国、丹麦、匈牙利、捷克、罗马尼亚等国家,喷灌和滴灌面积占灌溉面积的比例都达到了80%以上。灌溉技术的发展得到了长足的进步。

您需要先支付 80元 才能查看全部内容!立即支付

课题毕业论文、开题报告、任务书、外文翻译、程序设计、图纸设计等资料可联系客服协助查找,优先添加企业微信。